Fixed dental prostheses

The different types of prostheses

 

BRIDGES

A bridge is a fixed prosthesis that replaces one or more teeth by resting on the adjacent teeth.

 

WHAT IS A BRIDGE?

  • "Bridge" in English, the bridge uses the neighboring teeth as pillars on which it is sealed or glued.
  • There are several types of bridge, indicated according to the edentulousness: the most common are bonded bridges and conventional bridges.
  • Bridges can be made of metal, metal-ceramic or entirely ceramic, depending on the case. They are made by the dental technician and fitted by your dental surgeon.

 

 

Bridge

BONDED BRIDGES

Bonded bridges allow the replacement of a single tooth (or even two, in some cases) by relying on the adjacent teeth using bonded metal fins.

They are generally used to replace an anterior tooth.

When this bridge can be fitted, it is a very aesthetic solution and does not cause much damage to the neighbouring teeth on which it is anchored.

The prosthetic tooth can be made of metal or covered with ceramic. On the other hand, the fins cannot be covered with ceramic. They are therefore metallic in colour, but generally not visible or very discreet.

CONVENTIONAL BRIDGES

For this type of bridge, anchoring on the teeth bordering the gap is most often done by means of dental crowns and sometimes inlays or onlays. As with dental crowns, the elements of the bridge can be metallic, metal-ceramic or entirely ceramic (in certain cases only).

The teeth bordering the missing tooth are prepared to receive the bridge.

ADVANTAGES

  • The main interest of these techniques in the treatment of single edentulism is their non-invasive nature.
  • Their speed of installation compared to an implant or a conventional bridge, which requires longer follow-up and is more complex to produce, should also be taken into account.
  • In addition, with the evolution of bonding techniques and materials, they represent a solution of choice for the possibility of re-intervention that they offer, combined with satisfactory durability.
  • These different techniques are also a possible alternative to implantology when it is contraindicated.

 

TO KNOW

Bridges must be checked very regularly to detect any possible onset of decay at the anchors, but also to detect possible suffering of the supporting teeth due to the increase in forces at their level.

Good oral hygiene is strongly recommended. It is important to brush your natural teeth twice a day for two minutes, as well as your bridge. Use interdental brushes and/or dental floss to perfect your brushing.

These different types of bridges are indicated for people with single edentulism and when the adjacent teeth are healthy or slightly damaged for the purpose of tissue preservation.

Depending on the clinical context, a therapeutic choice adapted to your case will be proposed to you by your dental surgeon.

 

THE IMPLANT GRADUALLY REPLACES THE BRIDGE

The bridge and the implant are two techniques frequently used to replace one or more missing teeth.

However, with the advent of dental prostheses on implants, the number of bridges made tends to decrease.

Indeed, when a bridge is made, the teeth that support it must be prepared and then support the load of the replaced teeth.

With implants, the neighboring teeth are not touched and the chewing forces are taken care of by the implants. They thus preserve the future of the neighboring teeth and the alveolar bone that supports them.

 

 

Couronne

CROWNS

Prosthetic crowns are used to reconstruct very dilapidated teeth, whether they are devitalized or not. They are caps that crimp the remaining tooth stump to consolidate it and restore the shape and functions of the teeth.

For devitalized teeth, the crown must be anchored in the root by a tenon (or pivot or inlay-core). This tenon can sometimes be integral with the prosthetic crown, but it is most often independent.

Main steps in making a prosthetic crown

  • The tooth is prepared and a temporary resin crown is placed.
  • If the tooth is devitalized, a tenon is placed in the tooth, either directly or by passing through an impression of the inside of the root.
  • An impression is taken and sent to the prosthetist so that he can make the crown.
  • The crown is placed after a fitting.

Crowns consolidate and restore the shape of teeth

The choice of crown meets qualitative, financial and aesthetic criteria.

The different types of crowns:

The resin crown or temporary crown

It protects the tooth during the design stages of the definitive crown. However, over time, the resin becomes porous and microbes pass through; it is therefore necessary to avoid keeping it for too long.

 

The ceramic-metal crown

It consists of a metal shell covered with a ceramic that has the same color as the teeth. The presence of metal under the ceramic does not allow for the same degree of translucency as natural teeth, which can give the crown an opaque appearance.

The all-ceramic crown

It uses highly advanced design processes. It is made of an extremely resistant ceramic framework, covered with a cosmetic ceramic of the same color as the teeth. These metal-free crowns have an excellent aesthetic result and superior biocompatibility to ceramic-metal crowns.

 

Our advice

A crowned tooth must be checked very regularly in order to intercept any possible start of decay at the joint

INLAYS AND ONLAYS

Inlays and onlays are alternatives to large-volume composite resins.

This is a modern filling technique that sometimes allows you to avoid a much more mutilating prosthesis for the tooth. The term inlay will be used when only one side of the tooth is affected by decay. The term onlay will be used when several sides are affected.

 

Why am I being offered an inlay or an onlay rather than a simple composite resin?

The mechanical resistance of inlays and onlays is much better than that of resins made directly in the office using traditional techniques.

In addition, they allow you to obtain a better quality seal than with a traditional filling and increase the reliability of the contact point with the adjacent teeth, which reduces the risk of recurrence of decay and problems of gingival inflammation.

In the case of large cavities, creating an inlay or onlay often makes it possible to avoid having to create a crown which would cause further deterioration of your tooth.

 

 

Onlay 1

Inlays, onlays and aesthetics:

For reasons of mechanical resistance, they were systematically made of metal.

With the rise of new materials and new techniques, we can now manufacture very aesthetic white inlays and onlays, in hybrid ceramic (Vita, Enamic), which reproduce exactly the shade of your teeth.

Technique of realization: A single session is enough!

  • Local anesthesia.
  • The tooth is prepared by cleaning the cavity.
  • A digital impression is made using a 3D camera.
  • The onlay is modeled before your eyes by your dental surgeon and machined in a few minutes in the laboratory of the Belcenia Dental Practice.
  • The onlay is tried and glued in the cavity of the tooth.

The chemical adhesion to the walls consolidates the whole and ensures a better seal opposing any bacterial infiltration.

This technique of realization in a single step avoids several anesthesias and preserves the health of the pulp as much as possible.

DENTAL PROSTHESES FIXED TO TEETH

A damaged tooth can be reconstructed with fixed dental prostheses.

There are several types used depending on the needs:

  • The prosthetic dental crown replaces the entire visible part of the tooth. It then covers the entire tooth and consolidates it.
  • The inlay replaces a small internal part of the tooth. We can also use the onlay which is a partial dental crown, placed on the external part of the tooth.
  • When one or more teeth are missing, they can be replaced by a bridge (or dental bridge) fixed to the neighboring teeth by an onlay or a crown.

A temporary dental prosthesis will be offered to you so that the tooth is protected.

COMBINED PROSTHESES

A combined prosthesis is a prosthesis made up of a fixed part and a removable part. The removable part on a metal plate, replacing the missing tooth(s), is connected to the remaining teeth using an anchoring element: attachment, hook, telescopic crown, etc.

These prostheses are generally used in patients for whom implantation cannot be performed or who cannot cover the costs of implant surgery.

IMPLANT-RETAINED DENTURE

There are two types of implant-supported dentures that can be offered to the patient:

  • Fixed dentures, which are dental crowns or bridges directly screwed or sealed onto dental implants.
  • Removable dentures on implants: these are partial or complete dentures, stabilized by means of attachment systems that often resemble small snaps.

 

GOOD TO KNOW

Whether you have a fixed or removable denture, it is necessary to adopt rigorous dental hygiene.

Removable dentures must be removed and cleaned after each meal, and the mouth rinsed.